200L Hop Tank

200L Hop Tank

200L Hop Tank

200L Hop Tank

The hop tank produced by our company is specially developed for the hop add process, and is mainly used for the hop adding operation in beer production. It is equipped with a blender, tangential feed inlet, material outlet, manhole, temperature sensor, high/low liquid level. Sensor, two-way breathing valve, CIP cleaning sprinkler head, pressure gauge, integrated probe mirror, filtering device, etc. The tank structure is simple, easy to clean, corrosion-resistant, all materials in contact with the material are imported SUS304 stainless steel plate, is an indispensable equipment for beer manufacturers.
The main technical parameters
1 Working pressure         0.25MPa
2 Design pressure           0.3MPa
3 Operating temperature   120C
4 Design tempreture          130C
3 Materials                         SUS304
4 Medium                          Hop/Water
5 Power and motor model XL2-43-Y-4P(0.37KW)
6 Stirring speed                35r/min
7 Capacity                           0.2m3
8 Empty weight                  280kg
9 Operating weight            300kg
Note: 1 Our company can also design and manufacture according to the requirements of users.
2 The stirring speed may vary depending on the gear unit selected.
3 The equipment technical parameters designed and manufactured according to the user's requirements.
The main technical parameters
1. After the equipment arrives and opens, check according to the arrival list, whether the product specifications are consistent and whether the components are damaged or not.
2. This equipment is an integral assembly component. When installing on the site, it should be checked for its levelness. If the rotation of the discharge pipe is not flexible before starting stirring, whether it is in contact with the agitation, add 2/3 cans of water, and then start stirring. , Check the stirring rotation and smooth condition.
3. Before the equipment leaves the factory, water pressure tests have been carried out in the equipment. However, due to transportation reasons, the fastening bolts may be loose. Therefore, the bolts should be evenly tightened before the test and the pressure within the equipment is 1.25 times the pressure in the equipment. test.
4, should strictly check the electrical appliances, instruments and other devices in good condition, the entire device should be a good grounding to prevent static electricity gathered.
5. After the installation is complete, use water to clean the equipment. If dirt is removed, clean it.




 
TAG:
▲:there's nothing left ▼:there's nothing left

For professional brewery solution and exactly quotation, please feel free to send inquiry below.

Click image to refresh