3 vessel brewing system uk

The 3-vessel brewing system is composed of 3 fermenters and bright beer tanks. The number of fermenters can be determined according to customers' requirements. The 3-vessel UK is designed here. According to different fermentation requirements, the structure of fermentation tank is designed, so the structure of fermentation tank is dish head and cone bottom, polyurethane installation, dimple type cooling jacket, cooling jacket on cone section of tank, two or three cooling jackets on column section. This can not only meet the cooling requirements, ensure the cooling rate of fermentation tank, but also be conducive to the precipitation and storage of yeast. These designs are very popular in UK.

The inner and outer walls of 3 vessel are made of 304 stainless steel according to the international health quality standard, and the inner and outer polyurethane insulation thickness is 50-200 mm. The inlet and outlet pipes are installed at the bottom of the cone. The tank is equipped with cleaning system, tank top device, tank bottom device, rotary wine outlet pipe, gas filling device, liquid level meter, sampling valve and other matching valves, equipped with temperature sensor, with the help of PLC automatic control, the equipment can achieve automatic and semi-automatic control. The height of the bottom of the cone is one fourth of the total height. The ratio of tank diameter to tank height is one fourth of the total height. The ratio of tank diameter to tank height is 1:2-1:4, and the cone angle is generally between 60 ° and 90 °.

If you want to know more professional parameters of beer equipment, please contact us.

In order to meet the needs of UK customers, we have designed and developed the 3-vessel fermentation brewing system, which has the same function as the traditional fermentation tank. The difference is in the shape and location of the accessories. Compared with the traditional vertical fermentor, the horizontal fermentor accessories will be designed and installed according to the customer's site layout and actual needs.

As shown in the figure, the cost of a horizontal fermentor room of a UK Chinese customer is very expensive, which far exceeds the cost of the fermentor and can not accommodate too many vertical fermentors. Therefore, in order to facilitate the installation and save space in the store, we designed it as horizontal storage, with stainless steel iron frame inside, so that the beer with long fermentation cycle can be placed on the top, and the beer after fermentation can be stored Beer is placed on the bottom fermentation tank, which is convenient to carry beer, greatly reducing the space occupation of equipment and equipment. The fermentation tank is not only a production tool for beer brewing, but also a container for beer storage and sales. This makes full use of the limited space. Now it has become the most famous restaurant and bar in the area. Many customers ferment with fresh beer. Being attracted by canning, for consumers, they can see the production process and equipment of fresh beer with their own eyes. Coupled with delicious food and barbecue, they will not grudge their money and will drink more.

Are you interested in brewing beer and plan to have your own brewery in the new year of 2021? If your answer is yes, but only limited to room size and other questions, do not worry about these questions at all. Wemac is a professional and we are fully capable of helping you realize your wine making wish.

Main characteristics of fermentor.

1) Capacity: 100 liters, increase to 100000 liters as needed.

2) Material: stainless steel 304 / 316 or red copper, as required.

3) General configuration: mill, brewing room, fermentation, cooling and cleaning, etc.

4) The operation is automatic, intelligent and pollution-free.

If you also plan to add 3 vessel brewing system UK, such a small beer project, please contact us as soon as possible.